Author(s): T.V. Rajamurugan, R. Venkatesaperumal Abstract: The volume of solid wastes produced steadily increased due to the population growth, development of industries and modernization. Generally, large volume of vegetables, fruits, food waste and flower waste are produced, which are used as raw materials to generate…
Download Category: Volume01 Issue02
Some Investigations on Parabolic Trough Collector using Therminol Oil (VP-1) as a Heat Transfer Fluid
Author(s): Syed Jafar Abstract: An attempt has been made to investigate the performance of a new parabolic trough collector with a hot oil storage tank (HOST). This hot oil generating system uses Therminol oil (VP-1) as heat transfer fluid (HTF) which receives heat while passing…
Ameliorated PSO for Economic Dispatch of Generation in Power System Operation
Author(s): V.P. Sakthivel Abstract: This paper presents the application of a new metaheuristic optimization algorithm, an ameliorated particle swarm optimization (APSO) algorithm for solving the economic load dispatch (ELD) problem involving a number of equality and inequality constraints such as power balance, prohibited operating zones…
Analysing the period of dwell on the mechanical properties of dissimilar friction stir spot welded Al/Cu joints
Author(s): S. Siddharth, T. Senthilkumar Abstract: Friction stir spot welding is a solid state material joining technique which has been receiving worldwide attention due to its ability to join dissimilar materials without difficulty. In this investigation, friction stir spot welding technique was used for joining dissimilar…
Incremental Map Reduce With Map Reduce Recommendation System for E-Commerce Analysis
Author(s): D. Saravanan, K. Girija, B. Kumaragurubaran, T. Senthilkumar Abstract: As computer systems create and collect growing amounts of data, analyze it becomes a basic part of improving the services provided by Internet companies. A vital property of the workloads method by Map Reduce applications is…
A Review on Nano fluids: Preparation, Stability Mechanisms and Applications
Author(s): P. Karthick Kumar, P. Sivakumar, B. Kumaraguurbaran, T. Senthilkumar Abstract: Nanofluids, the fluid suspensions of nanomaterials, have shown many interesting properties, and the distinctive features offer unprecedented potential for many applications. This paper summarizes the recent progress on the study of nanofluids, such as the…
Stiffness Analysis on Aluminium Based Sandwich Composite
Author(s): N. Manikandan, Cyril Reuben Raj Abstract: Automotive industry is on the verge of development and more comforts are being incorporated in a vehicle. On other hand customers have stringent demand of fuel economy, high performance at low cost. In order to have high fuel economy…
Heat Distortion Test on Polymer Matrix Composite
Author(s): T. Vignesh, C. Arunkumar Abstract: Manufacturing of polymer matrix composites of different combinations of vinyl ester and polyurethane successfully carried. And also the heat distortion test is done. The heat distortion temperature for each specimen is found by using the heat distortion kit and the…
Experimental Analysis of an Asymmetric Double Slope Basin Type Solar Distillation
Author(s): S. Thulasi, S. Jaisankar, P. Dhanaraj Abstract: The Experimental carried out with Double Slope Basin type Solar Distillation same type under same operation condition throughout the day. Thermal modelling was done for the asymmetric double slope distillation system. This report would also throw light on the…
An Investigation of Deformation Behaviour on Pure Aluminium and Pure Copper Processed through Equal Channel Angular Pressing Die
Author(s): R. Raj Mohan, B. Kumaragurubaran, T. Senthilkumar Abstract: The Severe Plastic Deformation (SPD) has one of the methodologies called Equal Channel Angular Pressing Technique used to attain combination of both strength and ductility while passing the sample through the die without changing its dimension. ECAP entails the…