Author(s): Jishnu Raj, Bibin Thomas Abstract: A comparative study is carried down between Sukhoi Su-30MKI and F-16 fighter. The Sukhoi Su-30MKI is a twinjet multirole air superiority fighter developed by Russia’s Sukhoi and built under license by India’s Hindustan Aeronautics Limited (HAL) for the Indian Air…
Download Category: Volume02 Issue01
Comparative Study of BOEING AH-64 APACHE and HAL DHRUV
Author(s): Rilvansha N, N. Sathesh Raja Abstract: This contains about Boeing AH-64 Apache is an American made helicopter. It consists of four-blade and twin-turbo shaft engine with a tail gear arrangement. American Army is the primary operator of the AH-64. It was designed to perform in…
Preparation of Paper Nanomaterials in Aviation Field
Author(s): Akash Ajai, L. Anantha Raman Abstract: Nanotechnology is the engineering of fundamental particles at its molecular level. This covers both current work and concepts that are more advanced. In its original sense, nanotechnology refers to construct items from the bottom size, which mention at its base…
Comparative study of F-22 Raptor and Chengdu J-20
Author(s): Kalidas R, J.V. Muruga Lal Jeyan, Indrajith Prathapan Abstract: The F-22 Raptor and the Chengdu J-20 are fighter aircrafts capable of supersonic flight, stealth and extreme maneuverability using in American and Chinese military industry respectively. In this paper, we are comparing these two fighter jet…
MAGLEV Aided Landing and Take-Off (GABRIEL PROJECT): A Revolutionary Concept
Author(s): Sambhu Prasad, N. Sathesh Raja, Bharath B.S. Abstract: Air transport system at the future will address various challenges such as safety, eco-friendly, reliability, cost and time efficient etc. These ones have an impact on the aircraft’s take-off and landing (TOL) process. To deal with it, several methods…
Tensile, Flexural and Impact Behavior Study on Glass / Epoxy Composites
Author(s): Pooja A.G., J.V. Muruga Lal Jeyan Abstract: Fiber reinforced plastics or polymers are used where the design requires weight reduction, precision engineering, and limited tolerances. They are widely used in the field of Aerospace, automotive, marine and construction industries due to their advanced properties. This…
Study of Aerodynamic Effects of Dogtooth Lex on a Straight Wing
Author(s): Aravind B A, Nivin Francis Abstract: Leading edge extensions are small extension to an aircraft wing which is forward of the leading edge. The main aim of adding these extensions is to improve the airflow over the wings at higher angles of attack and lower…
Case Study of GTRE GTX 35-VS Kaveri
Author(s): Geo Oomman, L. Anantha Raman, Aditya Sunil Abstract: The GTRE GTX-35VS Kaveri is an afterburning gas turbine engine that was developed by the Gas Turbine Research Establishment (GTRE) division of the Defence Research and Development Organization (DRDO). In 1989, the DRDO started developing the GTX-35VS Kaveri…
Comparison between Sky Deck Design and Windowless Plane Design
Author(s): Indrajith Prathapan, Bibin Thomas, J.V.Muruga Lal Jeyan, Kalidas Abstract: Nowadays the aviation field is looking forward to integrating new technologies with the aircraft to improve the flying experience of the passengers. Innovative designs and creative ideas are welcomed both by the enthusiastic flying ones for…
Survey on River Periyar For the Determination and Analysis of Pollution Rates
Author(s): Vani Venugopal, Akhila Rupesh Abstract: Water is an unavoidable need in our life. Now a day’s water gets more polluted. Most of the rivers, ponds, streams etc. are polluted due to the deposition of industrial wastes, wastes from shops and other domestic wastes. Latest studies…